杨炳忠, 杨吝, 谭永光, 张鹏, 晏磊, 陈森. 南海流刺网网目尺寸与主捕对象体型特征关系的初步分析[J]. 南方水产科学, 2015, 11(6): 94-99. DOI: 10.3969/j.issn.2095-0780.2015.06.013
引用本文: 杨炳忠, 杨吝, 谭永光, 张鹏, 晏磊, 陈森. 南海流刺网网目尺寸与主捕对象体型特征关系的初步分析[J]. 南方水产科学, 2015, 11(6): 94-99. DOI: 10.3969/j.issn.2095-0780.2015.06.013
YANG Bingzhong, YANG Lin, TAN Yongguang, ZHANG Peng, YAN Lei, CHEN Sen. Preliminary analysis of relationship between mesh size of gillnet and body characteristics of target species in the South China Sea[J]. South China Fisheries Science, 2015, 11(6): 94-99. DOI: 10.3969/j.issn.2095-0780.2015.06.013
Citation: YANG Bingzhong, YANG Lin, TAN Yongguang, ZHANG Peng, YAN Lei, CHEN Sen. Preliminary analysis of relationship between mesh size of gillnet and body characteristics of target species in the South China Sea[J]. South China Fisheries Science, 2015, 11(6): 94-99. DOI: 10.3969/j.issn.2095-0780.2015.06.013

南海流刺网网目尺寸与主捕对象体型特征关系的初步分析

Preliminary analysis of relationship between mesh size of gillnet and body characteristics of target species in the South China Sea

  • 摘要: 利用南海北部流刺网调查的相关资料对3种流刺网网目尺寸与主捕对象体型特征的关系进行了分析。结果表明,康氏马鲛(Scomberomorus commersoni)、中国鲳(Pampus chinensis)和龙头鱼(Harpodon nehereus)的体型特征为流刺网捕捞提供了有利的条件;相对体围值对应的渔获率变化曲线形状与刺网钟形选择性曲线相似;454尾主捕对象中仅1尾(占0.002%)相对体围值小于0.8;41尾相对体围值大于1.20,占0.09%;当相对体围值为1.0~1.1时,渔获率最高;白鲳刺网、龙头鱼刺网和马鲛刺网的最小网目尺寸分别为144 mm、35 mm和72 mm。建议结合选择性试验与体型特征研究,为制定南海区流刺网最小网目尺寸提供参考。

     

    Abstract: We analyzed the relationship betweenmesh size of gillnet and body characteristics of target species for three kinds of gillnet fisheries. The results reveal that the morphological characteristics of Scomberomorus commersoni, Pampus chinensis and Harpodon nehereus are beneficial for gillnet fisheries. The catch rate curve of relative girth was similar to the selective curve of normal gillnet. Only 1 fish of 454 target species whose relative girth was less than 0.8, amounting to 0.002% of the total catch, and the relative girth of 41 fish was higher than 1.2, accounting for 0.09% of the total catch. The capture rate reached the maximum when the relative girth was 1.0~1.1. The minimal mesh sizes of three gillnet were 144 mm, 35 mm and 72 mm, respectively. It is suggested that the selectivity research should be combined with this study to provide references for promulgation of the minimal mesh size of gillnet in the South China Sea.

     

/

返回文章
返回