方伟, 周胜杰, 赵旺, 杨蕊, 胡静, 于刚, 马振华. 黄鳍金枪鱼5月龄幼鱼形态性状对体质量的相关性及通径分析[J]. 南方水产科学, 2021, 17(1): 52-58. DOI: 10.12131/20200158
引用本文: 方伟, 周胜杰, 赵旺, 杨蕊, 胡静, 于刚, 马振华. 黄鳍金枪鱼5月龄幼鱼形态性状对体质量的相关性及通径分析[J]. 南方水产科学, 2021, 17(1): 52-58. DOI: 10.12131/20200158
FANG Wei, ZHOU Shengjie, ZHAO Wang, YANG Rui, HU Jing, YU Gang, MA Zhenhua. Correlation and path analysis of morphological traits to body mass of juvenile Thunnus albacores[J]. South China Fisheries Science, 2021, 17(1): 52-58. DOI: 10.12131/20200158
Citation: FANG Wei, ZHOU Shengjie, ZHAO Wang, YANG Rui, HU Jing, YU Gang, MA Zhenhua. Correlation and path analysis of morphological traits to body mass of juvenile Thunnus albacores[J]. South China Fisheries Science, 2021, 17(1): 52-58. DOI: 10.12131/20200158

黄鳍金枪鱼5月龄幼鱼形态性状对体质量的相关性及通径分析

Correlation and path analysis of morphological traits to body mass of juvenile Thunnus albacores

  • 摘要: 该研究以5月龄黄鳍金枪鱼 (Thunnus albacores) 幼鱼为实验对象,测量并探索其形态性状与体质量的相关性。结果显示,体质量与各形态性状均呈极显著正相关 (P<0.01);通径分析发现胸鳍长对体质量直接作用最大 (0.507),其次为全长,而上颚长主要通过全长、头长和胸鳍长间接影响体质量;决定系数分析显示,全长、头长、上颚长和胸鳍长对体质量的共同决定系数之和为0.954,进一步表明体质量主要受这4个性状影响。经多元回归分析,建立了黄鳍金枪鱼形态性状对体质量的回归方程,并筛选出最优拟合曲线模型。在实际生产中,针对5月龄黄鳍金枪鱼以体质量为目标亲本选育时应以胸鳍长作为主要性状,全长、头长、上颚长等为辅助性状作为参照。

     

    Abstract: In this study, we selected 5-month-old yellow fin tuna (Thunnus albacore) juveniles as the experimental objects to explore the correlation between the 14 morphological traits and body mass. The results show that there was a very significant positive correlation between them (P<0.01), and the direct effect of pectoral fin length on body mass was found by path analysis (0.507), followed by full length, and upper jaw length mainly affected body mass indirectly through full length, head length and pectoral fin length. The determination coefficient analysis shows that the total decision coefficient of four morphological traits was 0.954, which further indicates that body mass was mainly affected by the above traits. Through multiple regression analysis, the regression equation of morphological traits to body mass was established, and the optimal fitting curve model was selected. In the actual production, the length of pectoral fin should be taken as the main morphological trait reference in breeding 5-month-old yellowfin tuna, and full length, head length and maxilla length as the auxiliary traits reference.

     

/

返回文章
返回